High Pressure Pump

DIPS6-2230 High Pressure

-          Max. Output pressure: 40000 psi (300mpa)

-          Pressure Intensification ratio: 24:1

-          Max. Flow rate: 3.1 lpm

-          Inlet water pressure: 0.4 mpa (For Intensifier)

-          Main motor power: 22kw / 30HP

-          Voltage: 415 VAC, 50Hz, 3 Phase (Standard) or as per your Purchase Order

-          Inlet Water pressure for heat exchanger :0.8 mpa

-          Oil Recycling: 52 liters/min.

-          Intensifier completely made by Dardi Water Cutter Co. Ltd. China.

-          Integral Inlet water filters (5Micron, 1micron, 0.45micron in series)

-          Working hour counter

-          Special tool kit for maintenance / repair

-          Arbitrarily hands adjusting working pressure

-          Automatically shut down (Trip Off) in case of super pressure of oil or low pressure of water for protection.

-          Dimensions:(Approximately)

·         Length – 1670mm

·         Width -  920mm

·         Height – 1180mm